Perfluorosulfonic Acid Membranes for Vanadium Flow Battery, Fe-Cr Flow Battery, etc.

• Customization: Available
• Color: Transparent Film
• Thickness (μm): 50±3
• Model NO.: DM8120A
• Weight (G/M2): 120±10
• Tensile Strength (Td/MD) (MPa): ≥25/25
• Elongation at Break (Td/MD) (%): ≥200/200
• Puncture Strength (GF): ≥500
• Water Content %: ≤7
• Transport Package: with PE Bags and Other Inner Package
• Specification: depends on the dimension and quantity of purchase
• Trademark: Jiangsu Fuyuan New Material Co., Ltd.
• Origin: Shandong
• HS Code: 3920209090

Product Description

Product Description

Perfluorosulfonic Acid Membranes DM8120A

The product is made of perfluorosulfonic acid resin, which allows cations one-way permeation. It shows good characteristics such as thin thickness, high strength, low swelling rate, high dimensional stability, and durability etc.. It can be widely used in vanadium flow battery, Fe-Cr flow battery, etc.

Specification

Model	Thickness (μm)	Weight (g/m2)
DM8120A	50±3	120±10

Performance Index

Property	Technical Index	Test Method
Physical Properties
Tensile Strength (TD/MD) (MPa)	≥25/25	GB/T 1040.3
Elongation at Break (TD/MD) (%)	≥200/200	GB/T 1040.3
Puncture Strength (gf)	≥500	NB/T 42080-2016
Hydrolysis Properties
Water Content (%)	≤7	NB/T 42080-2016
Swelling Ratio (TD/MD) (%)	≤7/7	NB/T 42080-2016
Other Properties
Vanadium Ion Permeability (10-7 cm2min-1)	≤10	NB/T 42080-2016
Electrochemical Properties
Coulomb Efficiency (%)	≥96.5	Enterrise Standard
Energy Efficiency (%)	≥82.5	Enterrise Standard
Voltage Efficiency (%)	≥85.5	Enterrise Standard

Packing and Transportation

1)The inner and outer package depends on the dimension and quantity of purchase order. Normally, the product is protected withPE bags and other inner package, then placed in cartons for transportation.

2)Handle with care during transportation, and try to avoid violent collision or vibration.

Cautions

1) Store the product away from direct sunlight, heat and dust.

2)The product must be kept in a sealed package, stored in an environment with temperature of 23±5°C and relative humidity of 30-70%. Before opening the package, pre-condition the membrane roll to the processing area temperature for 24 hours.It should be used as soon as possible once the carton is opened.

3)Once opened and exposed to the environment, the membrane will equilibrate to the ambient relative humidity, and change in dimensions accordingly. Membrane with customized dimension should be measured at 23°C and 50% RH.